Dialogic Mitel SX-2000 - Manual (Page 8)

Mitel SX-2000 Lightware
8
5.2.3 Routing Configuration
In the
Routing Configuration section, you must create two routes, one for the inbound direction (TDM to
IP) and one for the outbound direction (IP to TDM). Once you have created the routes, click the Save button for
the changes to take effect.
5.2.4 Number Normalization
The
Dialplan Configuration and Address Map Configuration sections are used for manipulating dial
numbers. For most PBX dialplans, an address map is required. See the following examples.