Dialogic Mitel SX-2000 - Manual (Page 32)

Mitel SX-2000 Lightware
32
Note: Parameters not listed below can be left at their default settings.
• Set Trunk Circuit Descriptor Number to an unused trunk circuit descriptor number.
•
Set Signaling Protocol to MSDN-DPNSS .
•
Set Dual Seizure Priority to Incoming .
• Set Far End Connection to Local Office .
•
Set Card Type to Universal T1 .
•
Press [ESC] then [4] to commit to changes and [ESC] then [1] to confirm the changes.
•
Press [ESC] then [Q] to return to the Trunk Forms menu.