Dialogic Mitel SX-2000 - Manual (Page 42)

Mitel SX-2000 Lightware
42
Note: Parameters not listed below can be left at their default settings.
•
Select an unused Route Number .
•
Set Trunk Group Number to the trunk group number defined in Step 11 of the SX-2000 Light
Administration.
• Set COR Group Number to 1 .
•
Set Digit Modification Number to the digital modification number defined in Step 2 of the Automatic
Route Selection.
•
Set Digits Before Outpulsing to 5 .
• Press [ESC] then [4] to commit to changes and [ESC] then [1] to confirm the changes.
• Press [ESC] then [Q] to return to the ARS Forms menu.