5 restarting the dialogic, Diva, Sipcontrol™ software – Dialogic Mitel SX-2000 User Manual
Page 17
Dialogic
®
4000 Media Gateway Series Integration Note
17
Apply the address map inbound rule on the inbound route as follows:
5.2.5 Restarting the Dialogic
®
Diva
®
SIPcontrol™ Software
Note: A restart of the Diva SIPcontrol software service is needed only if the setting under
Network Interface
is changed.
Save the configuration and restart the Diva SIPcontrol software service for the changes to take effect. To do so,
click
Service Status
on the left hand side of the main configuration page, and then click
Restart
SIPcontrol
. The
Last operation log
will show that the service has been stopped and started again.
See also other documents in the category Dialogic Hardware:
- Brooktrout 931-107-05 (2 pages)
- DM3 Media Boards DMV160LPEU (2 pages)
- DM/V1200A-4E1-PCI (2 pages)
- 3000 (32 pages)
- Integrated Media Gateways IMG 1010 (6 pages)
- DIALOG/4 (2 pages)
- DM3 Media Boards DMV600BTEP (2 pages)
- DM/V1200-4E1-PCI (2 pages)
- D/21H (2 pages)
- DISI32-EW (2 pages)
- D/21D (2 pages)
- Media Board VFX/41JCT-LS (2 pages)
- IP Board IPT10000C (2 pages)
- DM/F300-1E1-PCIU (2 pages)
- DM/V480A-2T1-PCI (2 pages)
- Media Board DMV1200BTEP (2 pages)
- TX4000 PCI SS7 (48 pages)
- DM3 Media Boards DM/V2400A-PCI (2 pages)
- Station Interface Box SI/240 (2 pages)
- Network Interface Board DNI2410TEPEHMPQ (2 pages)
- PBX Integration Board D/82JCT-U (2 pages)
- INTEGRATED MEDIA GATEWAYS 1010 (73 pages)
- Brooktrout 931-103-05 (2 pages)
- DM3 Fax Boards DM/F240-1T1-PCI (2 pages)
- DSI SPCI Network Interface Boards (111 pages)
- DM/N1200-4E1-cPCI (2 pages)
- Switching Board DI0408LSAR2 (2 pages)
- Media Board DM/V1200BTEPEQ (2 pages)
- Brooktrout TR1034 BRI (2 pages)
- M7324 (178 pages)
- DM/IP601-CPCI-100BT (2 pages)
- IMG 1004 (169 pages)
- Media Board D/120JCT-LS-EW (2 pages)
- DSI SS7MD (191 pages)
- Digital Network Interface Board DN/I601TEPHMP (2 pages)
- DM/IP481-2T1-PCI-100BT (2 pages)
- Media Board DM/V600BTEPEQ (2 pages)