Dialogic Mitel SX-2000 - Manual (Page 49)

Dialogic ® 4000 Media Gateway Series Integration Note
49
Step 6: Configure the Connection to Remote Sites as follows:
Select
File > Connect to Remote Site .
Note: Parameters not listed below can be left at their default settings.
•
Set Connection Medium to Ethernet Network Card .
•
Under Network Settings , enter the IP address of the 3300 Universal NSU (The default value is
192.168.1.1.).
• Set Ethernet Remote System to PRI Card / Universal NSU .
•
Click Connect .
•
Click OK at the Connected to remote site dialog box.