Dialogic Mitel SX-2000 User Manual

Page 10

Mitel SX-2000 Lightware

For the dialplan to be applied to inbound calls, click the

Details

button of the configured SIP peer and

configure the

Address Normalization

settings as in the screen below. This converts the phone number into

the E.164 format as needed by Microsoft

Office Communications Server 2007. Click

on this page, and

Save

on the next page for the changes to take effect.

5.2.4.2

Address Map Configuration Example

If the dialplan does not meet your setups special requirements, the

Address Map Configuration

can be

used. An address map entry uses regular expressions (RegEx) (so does Microsoft

Office Communications

Server 2007) for converting the call address format for inbound or/and outbound direction.

Important note before applying regular expression rules in address maps: The call address for outbound calls (IP
to TDM) includes a “@hostname” part. For example,

[email protected]

is the call address,

not just +17166391234. For inbound calls (TDM to IP), the call address is the called or calling number, with a
possible prefix “+”, “N”, or “S”. For example, an inbound call has called number 1234 with ISDN type of
numbering flag set to

Subscriber

, and the calling number 49715233334444 with ISDN type of numbering flag

set to

International

. The called address will be S1234 and the calling address will be +49715233334444.