Dialogic Mitel SX-2000 - Manual (Page 44)

Mitel SX-2000 Lightware
44
Note: Parameters not listed below can be left at their default settings.
•
Set Leading Digits to a currently unassigned ARS number.
•
Set Digits Dialed to an unused 2-digit string.
• Set Number of Digits to Follow to 2 .
•
Set Termination Type to Route .
•
Set Termination Number to 2 .
• Press [ESC] then [4] to commit to changes and [ESC] then [1] to confirm the changes.
• Press [ESC] then [Q] to return to the ARS Forms menu.
• Continue to press [ESC] then [Q] until you are logged out of the system.
6.1.1.3 NSU Configuration/IMAT Programming
Step 1: Open up IMAT and create a new database as follows:
Select
File > New Database .