Combinations – REMKO RXD Series User Manual
Page 5
The equipment is shipped in sturdy
packaging. Immediately check
the equipment on delivery and
make a note of any damage or
missing parts on the delivery note.
Inform the forwarding agent and
contractual partner.
No warranty can be assumed for
later claims.
The indoor unit on the split-design
combined room air conditioning
units serves to extract heat from
the indoor room being cooled. The
outdoor component then expels
this heat to the outside.
If combined heating/cooling
units are operated as heaters, the
heat absorbed by the outdoor
component can be discharged
by the interior unit into the room
being heated.
The unit is designed for
suspended ceilings with Euroraster
dimensions. The cassette is hidden
behind the suspended ceiling, only
its cover is visible. It is operated via
an infrared remote control.
The indoor unit consists of a fin
vaporiser, vaporiser fan, regulation
system and condensation pan.
The indoor unit can be combined
with REMKO outdoor components
that provide sufficient cooling
output. The outdoor component is
controlled via the regulation of the
indoor unit.
Condensation pumps and wired
remote controls are available as
accessories.
Description of the
equipment
Transport and
packaging
Schematic of refrigerant circuit
Vaporiser fan
Connection to suction pipe
Connection to injection pipe
Vaporiser
Combinations
RXD 260
RXD 350
RXD 520
RXD 680
RXD 1200
RXS 261H
•
RXS 351H
•
RXS 521H
•
RXS 681H
•
RXS 1200H
•
RXD 260
RXD 350
RXD 520
RXD 680
RXD 1200
RXM 226
••
RXM 235
••
RXM 252
••
RXM 268
••
RXM 326
••
•
RXM 335
•••
RXM 426
••••
RXM 435
••••
Cooling
Cooling / heating
5
Refrigerant pipes are used to connect the indoor unit to the outdoor
component.
Outdoor component
System design
Stop valve
Indoor unit with
Cover
Liquefier fan
Injection pipe
Suction pipe
Indoor area
Outdoor area
Condensation pipe
Control cable
Mains cable
Condensation
pipe