REMKO RXD Series - Manual (Page 17)

Dimensions in mm
RXD
260
RXD
350
RXD
520
RXD
680
RXD
1200
Distance A 35 mm
Distance B 25 mm
Mounting the unit 615 x 280 mm 615 x 810 mm
5 Hooking in the unit
Structural component
7 Fastening the unit
Structural component
B
A
615
280
All values in mm
810
615
6 Mounting the unit
RXD 260-520 RXD 680-1200
Connection of refrigerant
pipes
The refrigerant pipes are
connected to the RXD 260-520 on
the angled side of the unit and on
the RXD 680-1200 in the middle
of the longer side.
It may be necessary to fit a
reducer or flared adapter to the
indoor units. These fittings are
included as standard with the
indoor unit. Once installed, the
connections should be made tight
against vapour diffusion.
The units are factory filled with
dry nitrogen to check for leaks.
The pressurised nitrogen is
released when loosening the
union nuts.
CAUTION
4. Make sure that clearance A,
as specified in the table below,
is provided between the
underside of the suspended
unit and the underside of the
fastening surface. Connect
the refrigerant pipes, electrical
cables and condensation pipe
to the indoor unit as described
below (Fig. 7).
5. Check that the unit is level.
6. The final task is to tighten the
counternuts and attach the
cover.
17