REMKO ATY 261 - Manual (Page 8)

A symbol is shown on the display to indicate that the settings are being transferred.
Button functions
Press the ON / OFF button to activate or deactivate the unit.
The programmed settings and parameters are shown on the display
before the unit switches off. ON/OFF Button
ON/OFF ON/OFF
 /  Buttons The remote control has its own temperature display. Press the  / 
buttons to change the display to . The  button reduces the
desired target temperature, the  button increases it. This setting is
only supported in cooling mode. In automatic mode, press the  button
to reduce the fixed temperature from 24 °C by 1 or 2 °C, press the 
button to increase it by 1 or 2 °C.
The current setting is displayed next to the temperature.
Temperature adjustment is not possible in dehumidifying mode.
Automatic mode
 ...  ... 
Cooling mode
  
MODE Button Press the MODE button to switch between operating modes. A total of 5
modes are available:
1. Automatic automatically selects cooling mode
2. Cooling mainly used in summer
3. Heating not possible
4. Circulation for air circulation only
5. Dehumidify used in summer or winter
MODE
Automatic Cooling Heating Circulation Dehumidify
MODE MODE MODE MODE
REMKO ATY
8