REMKO ATY 261 - Manual (Page 6)

The indoor unit is easy to operate using an infrared remote control. This is supplied as standard.
The indoor unit beeps to acknowledge the correct transmission of data.
If it is not possible to program the indoor unit using the remote control, it can also be manually operated.
Display on indoor unit
The display is lit according to the
settings.
The infrared remote control can
send the programmed settings
from a distance of 6 m to the
receiver on the indoor unit.
Data will only be received correctly
if the remote control is pointed
at the receiver and no objects are
obstructing the transmission path.
First of all, insert the batteries
(two type AAA) supplied with the
remote control.
Remove the cover on the battery
compartment and insert the
batteries. Take into account the
correct polarity (see markings).
Operation
Errors are displayed in coded
format (see chapter on
trouble-shooting and customer
service).
CAUTION
Infrared remote control
Immediately replace flat
batteries with a new set,
otherwise there is a risk of
leakage. It is recommended
that the batteries are removed
if the equipment is shut down
for long periods
NOTE
Manual operation
The indoor unit can also be started
manually. Press the button on
the right of the unit to activate
automatic mode.
The following settings apply to
manual mode:
Automatic mode:
above 21 °C = cooling mode,
set temperature 24 °C
fan speed AUTO
Pressing any button on the infrared
remote control interrupts manual
operation.
Max. distance 6 m
max. 6 m
Display on indoor unit
Power
Unit switched on
Circulation mode
active
Timer mode Fan speed
Levels 1, 2 and 3 and
Auto (flashing)
Display
Used to display
coded error
messages, room
and target
temperature
C
TURBO
SET
Ion generator
switched on
Help save on energy consump-
tion in stand-by mode! If the
device, system or component
is not in use, we recommend
disconnecting the power sup-
ply. Components with a safety
function is excluded from our
recommendation!
TIP
REMKO ATY
6