REMKO ATY 261 - Manual (Page 13)

The unit measures the temperature inside the wall-mounted equipment.
This may differ from the temperature near the remote control. Press this
button to send the temperature measured at the remote control to the
wall-mounted unit. The temperature is continually adjusted to the actual
temperature of the remote control (approx. every 5 minutes) providing
the function is switched on.
I FEEL Button (hidden)
I FEEL I FEEL I FEEL
In I FEEL mode the temperatures of the remote control and the display on
the unit may differ. Press this button to immediately send an adjustment
signal to the unit, the target temperature remains unchanged.
DISP Button (hidden)
DISP
C C
The unit includes an ion generator for generating negative ions.
High levels of negative ions may be found in mountain regions, near
waterfalls or in forests. Humans perceive such air to be "pure" when
they are breathing it in. In contrast, indoor rooms usually contain low
concentrations of ions. The ion generator enriches the oxygen molecules
in the circulated air to improve the air quality for humans. Suspended
particles and dust are bound in the air to facilitate natural air purification.
Ionisation causes the dust to settle on smooth surfaces where it can be
wiped away. Ensure the housing and filter are cleaned on a weekly basis
when using ionisation. This function is available in all operating modes.
ION Button (hidden)
ION ION ION
13