REMKO ATY 261 - Manual (Page 12)

TIMER ON/OFF programming The controller switches the unit on and off at the programmed times.
During operation, all the settings are shown on the display. Only the
timer settings are visible when the unit is shut down.
Unit On Unit Off Example:
The controller switches on at 09:00.
The unit remains operational until 16:30.
TIMER OFF (hidden)
This button is used to program a countdown timer for switching off the
unitPress several times to set the timer to 30 minutes, 1 hour, 2 hours, 3
hours or 5 hours. The current time is replaced by the remaining time.
OFF OFF OFF
Press this button to increase the air flow rate in cooling or heating mode
for 30 minutes. This allows rapid cooling or heating of the room. Cooling
and humidifying mode cannot be reached, instead the unit switches to
automatic mode.
After 30 minutes the controller reverts to the last programmed settings.
TURBO Button (hidden)
TURBO TURBO TURBO
TIMER OFF programming
TIMER   SET
Unit shut
down
Programmed
time reached

REMKO ATY
12