REMKO ATY 261 - Manual (Page 11)

Press the buttons to activate a program which will raise the target
temperature in cooling mode by 1 °C and 2 °C after 1 and 2 hours
respectively. SLEEP Button (hidden)
Target temperature +1°C
Unit operational
1 hr.
Diagram of function
Operation
Stop
Target temperature +2°C
2 hrs. 6 hrs.
SLEEP SLEEP SLEEP
TIMER Button (covered)
This button is used to program the switch-on and switch-off times.
Press the TIMER button several times to activate the switch-on, switch-
off or combined switch-on/switch-off timer. The switch-on/off time
will flash. The Timer symbol on the indoor unit is lit. Press the  and
 buttons to set the desired switch-on/off time. If set successfully, the
Timer symbol will flash a further 15 seconds. Press the SET button to
complete programming. The unit automatically switches on or off once
the programmed time is reached. f the unit is switched on automatically,
the previously set mode, temperature and fan speed are activated.
The switch-on/off time can be prematurely cancelled by pressing
the appropriate Timer button. The timer symbol on the indoor unit
extinguishes.
TIMER ON programming
Timer  \ SET
Unit in
operation
Programmed
time reached
 /
11