REMKO ATY 261 - Manual (Page 10)

Press the CLOCK button under the cover the program the time. The time
will flash on the display. Press the  and  buttons under the cover to
set the current time. Press the SET button to complete the programming
procedure< the display will stop flashing.
CLOCK Button (hidden)
 SET CLOCK
Press this button to select the oscillating function for the air
outlet fins. This allows direct switching from a fixed position to the
oscillating function. The swing function improves air circulation in the
room. SWING Button (hidden)
SWING SWING SWING
Press this button to set the fan speed. One can choose between low,
medium, high and automatic fan speed.
FAN FAN FAN FAN
FAN Button
In dehumidifying mode, the room temperature can be set between 18 °C
and 30 °C. The low refrigerant temperature causes the air temperature
at the finned heat exchanger to fall below the dew point. Any excess
humdity in the air condenses in the finned heat exchanger. As a result the
room is dehumidified. The fan speed cannot be altered. DEHUMIDIFY Mode
DEHUMIDIFICATION
MODE MODE
SWING
REMKO ATY
10