REMKO BL 262 DC - Manual (Page 53)

13.4 Spare parts list - Outdoor unit
No. Designation BL 262 DC AT BL 352 DC AT
1 Front panel
On request by providing the
serial number
2 Fan blade, condenser
3 Fan motor, condenser
4 Condenser
5 Cover panel
6 Side part
7 Compressor, cpl.
8 Shut-off valve, suction pipe
9 Shut-off valve, liquid pipe
10 Reversing valve
11 E-box, cpl., incl. control board
12 Choke
13 Temperature probes, set
14 Quick-release coupling set, outdoor unit
15 Refrigerant piping incl. quick-release coupling 3m
15 Refrigerant piping incl. quick-release coupling 5m
15 Refrigerant piping incl. quick-release coupling 8m
When ordering spare parts, please always state the serial no., unit number and unit type (see name plate)!
14 Shutdown
Temporary shutdown
1. Let the indoor unit run for 2 to 3 hours in
recirculation mode, or in cooling mode at
maximum temperature, to extract any
residual humidity from the unit.
2. Shut down the system using the remote con-
trol.
3. Switch off the electrical power supply to the
unit.
4. Cover the unit as far as possible with plastic
foil in order to protect it from the influences of
weather.
Permanent shutdown
Ensure that units and components are disposed of
in accordance with local regulations, e.g. through
authorised disposal and recycling specialists or at
collection points.
REMKO GmbH & Co. KG or your contractual
partner will be pleased to provide a list of certified
firms in your area.
53