OpenEye CM-816 - Manual (Page 54)

30875AF 55
Maintenance
On the Maintenance page you can export the cameras current configuration, or import
the configuration for a camera. Use the factory default page to reset the IP Camera to
factory default settings if necessary.
Do not import configuration files from different models of cameras.
Export Configuration:
1. Check the appropriate boxes for information that you want exported.
2. Click Export Configurations.
3. The .bin file will be saved.
The default location for exported configurations is C:\
Upload (Import) Configuration:
1. Click Browse in the Configuration Import box.
2. Select a .bin file that you want to import.
3. Click Import.
4. Click Yes when prompted that the import will cause a system reboot.
There are two factory default settings available: Full Restore that restores default
settings including network settings, and a Partial Restore that restores default settings
excluding network settings. A system reboot is also available; this preserves all settings.
If a Full Factory Default is used, you will need to use the Network Camera
Manger to find the desired camera(s) again.