OpenEye CM-816 - Manual (Page 23)

24
Wall Mounting with Corner Mount
The corner mount must be used in conjunction with the wall mount bracket.
Items Needed:

Dome Camera

Wall Mount Bracket Accessory

Corner Mounting Plate

Waterproof Gasket (supplied)

Screws and Anchors
appropriate for the mounting
surface (not supplied)
Tools Needed:

Drill

Screwdriver
Installation:
1. Cut a cable access
hole on the wall.
Cables can also be
threaded through
the cable entry
knockout on the
bracket if desired.
2. Secure the corner
mount plate on the
corner wall with the
appropriate screws
and screw
anchors.
3. Attach the wall mount bracket to the corner mount plate with the supplied
screws and washers.
4. Thread the cables through wall mount bracket and the top holder.
5. Block the cable entry hole with the supplied sponge.
6. Attach the waterproof gasket to the wall mount bracket.
7. Attach the top holder to the wall mount bracket with the supplied screws
and washers and adjust the gasket to the junction of the wall mount
bracket and the top holder.
8. Connect the cables to the dome camera.
9. Attach the dome to the top holder and secure them with the supplied
screw.