OpenEye SW-RWTCP - Manual (Page 42)

42
Predefine Filters Tab
The Predefine Filters tab enables the user to add and modify predefined filters to clean up data. Assign the filters only to the desired
registers and select the appropriate filter to display only the necessary information.
Add Predefined Filters
1. Open the Options window and click the Predefine Filters tab.
2. Select the Enable Predefine Filter check box and click Add.
3. Select the desired predefined filter from the list.
4. Select an option from the Apply Type list.
Display – applies filter to on-screen display (text overlay)
Store – applies filter to database (searchable)
Display & Store – applies filter to display and database.
5. Click the << button to add registers to the Apply POS ID List
box.
6. Click OK to save.
POS IDs associated
with the filter
Filter Description