OpenEye SW-RWTCP - Manual (Page 20)

20
MICROS 9700 CONFIGURATION
Micros 9700 Interface File
1. Open Interfaces in the EMC > Configurator.
2. Add a new record. The System Name MUST be EMON INTFC.
Note The space between the two words of the system name is important.
3. PC Number: Select the Primary PC.
4. Service Type: 2-Security.
5. Timeout: 0.
6. Ping Frequency: 0.
7. Type: 1 – TCP.
8. TCP Host Name: Enter the IP Address of the OpenEye DVR.
9. TCP Port: Enter a TCP Port.
Note OpenEye recommends port 5010.
Note This port will be used in the configuration of the RediWatch software on the DVR.
10. Options: Enable Option - ”ON=9 Digit Terminal Ids, OFF=2 Digit Terminal Ids”
Enable Option - “Enable Interface Log “