OpenEye SW-RWTCP - Manual (Page 16)

16
IBM ACE CONFIGURATION
Enabling the Catalina Option on the IBM 4690 OS Controller
From IBM POS main screen:
1. Press 1, then press Enter.
2. Personalization [enter].
3. Store [enter].
4. Catalina.
Set Catalina options as follows:
a. Catalina Marketing Active = On.
b. Catalina Marketing Release = 2.
c. Host Name = CATALINA. This must match Host Name in ADXHSIHF.DAT file, see below.
d. Host Port Number = 2100.
Editing the ADXHSIHF.DAT file
From the IBM POS main screen:
1. Press 7, then press Enter.
2. Type ADX_SDT1 and press Enter.
3. Type DREDIX ADXHSIHF.DAT to use the Dredix editor to edit the ADXHSIHF.DAT file.
4. Edit/Add the entry for the Catalina IP Address as shown below: TIP: Everything to the right of the # character is a comment.
a. 207.216.62.206 CATALINA #Catalina Server [please enter the DVR IP address here at the beginning].
b. If CATALINA is in use already with this configuration please contact support for assistance.
5. Press CTRL+K+S to save the changes.
6. Press CTRL+K+Q to exit.
Note: Example of edited file “ADXHSIHF.DAT” Hosts file:
#/etc/hosts
file
209.89.94.136 CC #This machine 4690 Controller – CC (Master)
209.89.94.137 DD #4690 controller – DD (Alternate)
207.216.62.206 CATALINA #Catalina Server (DVR IP ADDRESS)
Set up the File Server options
From the IBM POS main screen:
1. Press 4, then press Enter.
2. Press 1, then press Enter.
3. Press 2, then press Enter.
4. Press Y, then press Enter.
5. LAN Configuration.
6. Press 2 for Ethernet, then press Enter.
7. Press MC, then press Enter.
8. Press CC, then press Enter.
9. X Background Application, then press Enter.
10. Press 2, then press Enter.
11. X ACE Catalina, then press Enter.
12. Message Ace Catalina.
13. Program adx_ipgm:acetina.286.
14. Save and exit.