OpenEye Gen6 RADIUS-PC - Manual (Page 47)

48 32541AD
Changing Alarm Colors
The colors of the three alarm types can be customized in the RADIUS Options window. It may be
necessary to change the alarm colors depending on the colors of the map. Customize the color and
alarm time for Sensor, Motion and Video Loss events.
1. Click Menu , and then click Settings .
2. Click General .
3. Change the Map Alarm Event colors.
4. In the Auto-switching to map event section, select Use
to open the associated map on an alarm event.
5. Enter the time (in seconds) for the alarm to flash after
activation.
Adding a Map Alarm Sound
1. Click Menu , and then click Settings .
2. Click General .
3. In Use Map Alarm Sound, select the Use check box.
4. Select Beep or Wave File .
5. If using a Wave file, click the folder icon to browse to the file location.
6. Click Test .
7. Click Save and Close .
Viewing Video on Alarm
When the Alarms are activated, colored circles will flash around the sensor icon in the map. To view the
camera associated with the alarm, double-click the flashing sensor icon. The video will open in a new
window.