OpenEye Gen6 RADIUS-PC - Manual (Page 28)

29
Use the Live Setup to configure on screen display options, full-screen on alarm settings, and JPEG
image capture on alarm.
Auto Switching Time (Sec) – Sets time between the camera view sequencing
PTZ controller transparency setting – Set the transparency level of the PTZ controller.
Enable full window when double clicked in live mode – Enable to show a channel full screen when
the live mode display is double-clicked.
Reset live video position on disconnection – Resets video positioning to display in sequential order.
Show PTZ controller with advanced mode – Show that advanced menu when the PTZ controller
opens.
Hide hidden cameras in tree list – Exclude cameras, which are set to be hidden from a user, from the
tree list of cameras.
Hold Screen Ratio – Preserves the native aspect ratio of the video.
Hide all OSD – Hide all on screen display text.
Use Font Setting – Change the font and font size of the on screen display text.
Save Directory – The location to which alarm images are saved.
Jpeg Capture on Alarm – Capture a JPEG image of the associated channel on an alarm event.
Full Screen Duration Time – Show alarm video full screen on motion or sensor alarm.
The duration defines the amount of time the video will display before a subsequent alarm
video can display. Single alarms will display full screen until closed by the user.
Audio play mode – Quality first – Play best quality video / Sync first – Keep audio synced with video.
On-screen display options
Location to
save image
captures
Define action for alarms