OpenEye Gen6 RADIUS-PC - Manual (Page 29)

30 32541AD
Adding a New Recorder
1. Click Menu , and then click Settings.
2. Click DVR List Setup .
3. Select the recorder model type from the Model list.
4. Type a name to identify the recorder in the Server Name field.
5. Type the IP Address of the recorder in the IP / URL field.
6. Select the Port the recorder uses to transfer data. This port is specified in the Network Setup
display on the recorder.
7. Type the User ID and Password of an authorized remote user. This is the same information used
by the recorder.
8. Type the name of a new group in the Group box – or – click the arrow to select a previously
created group.
9. When you are finished, click Add .
10. When you have added all of your recorders, click Save and Close .
Editing a Recorder
1. Click Menu , and then click Settings.
2. Click DVR List Setup .
3. Select the recorder to edit from the list of connected recorders.
4. Edit the necessary information.
5. When you are finished editing information, click Update .
6. When you have added all of your recorders, click Save and Close .
Displays list of added recorders
Name used to
identify the
DVR
User name/ password of an authorized remote user
User defined local
contact numbers
Update edited settings
Delete selected site
Save new settings