Monitor setup, Connecting multiple monitors, Power setup – OpenEye Gen6 RADIUS-PC User Manual
Page 14
15
The R-Series Remote Client Workstation includes the following connections available to attach a
monitor.
HDMI Output
To TV / Digital Display
VGA Output
To TV / Analog Monitor
DVI-D Output
To TV / Digital Display
Display Port
To TV / Digital Display
You can connect up to two monitors to the video card for a maximum of four monitors.
Attach the monitor or monitors to the rear of the machine using the cable supplied by the monitor
manufacturer. Refer to the monitor manual for detailed information on how to setup and use it.
Connecting Multiple Monitors
1.
Connect the monitors to the appropriate ports. For four-port models, you can connect up to two
monitors to the video card for a maximum of four monitors.
2.
Right-click the Desktop and then click
Screen Resolution
.
3.
Drag the icons for your monitors into the desired positions. If all of your monitors are not displayed,
click
Detect
. If you need help determining the number assigned to each monitor, click
Identify
and
the number will display on the monitor.
4.
In the
Multiple Displays
field, select
Extend these displays
.
5.
Select the appropriate resolution for each monitor by selecting the monitor icon, and then selecting
the
Resolution.
6.
When configuring the primary monitor, select the
Make this my main display
check box.
WARNING:
To reduce the risk of electrical shock or damage to the equipment:
Do not disable the power grounding plug.
The grounding plug is an important safety feature.
If the electrical plug you are using does not have a ground plug receptacle
contact a licensed electrician to have it replaced with a grounded electrical
outlet.
Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
Disconnect the power from the computer by unplugging the power cord either
from the electrical outlet or the computer.