OpenEye Gen6 RADIUS-PC - Manual (Page 32)

33
Health Check enables you to monitor the status of your recorders and notify users of video loss,
recording failures or storage failures via e-mail alerts or trigger an audio warning to notify the RADIUS
operator.
Set Up Health Check Options
The Actions tab allows you to define the frequency and thresholds for your Health Checks. You can also
choose how to be notified when a Health Check alert is triggered.
1. Click Menu , and then click Settings .
2. Click Health Check Setup .
3. Click the Actions tab.
4. Select Enable Health Check .
5. Define the Check Once Every interval by Day , Hour , and Minute (10 min. ~ 7 days).
6. Select the appropriate check levels for Video Loss , Recording Failure , Disk Free Space , HDD
Error , and Recorded Day Failure .
7. Define the number of occurrences that determines a warning or failure for each item.
RADIUS can send E-mail notification of warnings. To configure email updates, see the
E-mail Alert Setup section of this manual.
Number of
occurrences to define
a Warning / Failure
Define action on failure
Test .wav file