Nortec LINKS 2 GSTC - Manual (Page 8)

4 | Installation
Retrofit Installation Of A GSTC/SETC Nortec Links2 Package
BACNET, LONWORKS And N2 Modules:
Mounting The Links2 Assembly
Install the bracket assembly using 8- 32x ½” hex-drive screws. Notice, 4 screws are used for the
hinges, and the 5 th screw for fastening the bracket in place.
Figure 1. Bracket Placement and Screw Locations
Figure 2. Detailed View of 5 th Screw
5 th screw