Retrieving xif file instructions – Nortec LINKS 2 GSTC User Manual
Page 15
Installation
|
11
Retrieving XIF file instructions
The XIF file can be retrieved directly from the Links package. A Windows based laptop and an
Ethernet cable are required for this process. This process requires the “Remote User Interface”
tool from Fieldserver. It is available by visit
and
downloading the “Utility” software:
Once this software has been installed, follow the following procedure:
1. Locate desired MASTER humidifier that contains the Links package. Ensure unit is powered
on and remove the panel on the RIGHT side of the humidifier. Locate the Links package inside
of the unit.
2. For LINKS2 packages (with the blue ZONET router), connect one end of the CAT5 cable to the
router in an available port (ports 3 or 4 should be free) NOTE: Do NOT plug into the “WAN”
port.
For LINKS XPS packages (gateway device on its own), connect the CAT5 cable directly into the
Ethernet port on the gateway.