Nortec GS Series - Manual (Page 10)

7 | GS Series Installation
Installation
Figure 3: Typical Installation Indoor
Indoor Installation
The installation must conform with local building codes or, in the absence of local codes, with the ANSI
Z223.1, National Fuel Gas Code, and/or CSA B149.1installation codes. Refer to the Gas Piping section of
this manual.
Locating and Mounting
GS Series humidifiers are designed for floor mounting or on a GS stand (optional). The clearance
dimensions shown in this manual are for reference only and are the minimum required for maintenance of
the humidifier. Local and national codes should be consulted prior to final location and installation of the
humidifier. Nortec cannot accept responsibility for installation code violations.
Figure 3 shows a typical installation with all required connections to the GS humidifier. Careful consideration
should be given to all of these connections when choosing a location for the humidifier.