NavCom StarControl Rev.C - Manual (Page 35)

StarControl User Guide Rev. C
5 - 33
Figure 30A: Base RTK Tab Options Figure 30B: Rover RTK Tab Options
Table 5: Base Correction Output Messages, Status, & Data Rates
Field Options
Mode Base (Rover)
Correction Output Format
RTCM RTK, CMR, NavCom, RTCM Code,
CMR+
Reference Station ID
0 – 99 for CMR, CMR+ and 0 – 1023 for
NavCom, RTCM RTK
Correction Rate 1Hz – 10Hz
Base Position Rate 10 Sec, 20 Sec, 30 Sec
‡
If Internal Radio is selected, StarControl will assign correction output to
the Radio port. If External is selected, StarControl will assign corrections
output to the receiver port that is not currently connected to the hand-held
device.
Table 6: Rover Correction Input Messages & Data Age Values
Field Options
Mode Rover (Base)
Correction Format RTCM RTK, CMR, NavCom, RTCM dGPS,
CMR+
Reference Station ID 0 – 99 for CMR, 0 – 1023 for NavCom, RTCM
(0 = use any Base Station ID received)
Maximum RTK Age 3 Sec, 10 Sec, 15 Sec, 30 Sec, 60 Sec
Maximum dGPS Age 60 Sec, 120 Sec, 180 Sec, 240 Sec, 300 Sec
‡
StarControl will direct the receiver to collect corrections from the Radio port. If
External is selected, StarControl will direct the receiver to collect corrections from
the receiver port that is not currently connected to the hand-held device.