NavCom StarControl Rev.C - Manual (Page 24)

StarControl User Guide Rev. C
4 - 22
Table 1: Diagnostic Tab Elements
Version Info
The Version Info dialog details the receiver’s options capabilities, and its software
versions for all internal modules.
Figure 19: StarControl Status\Version Screen
‡
The Version Info tab is a single tab, which can be scrolled through to
view all of the version and option information. The graphic above is used
only to display all available information.
Property Green Check If Red X If
Receiver
Detected A Navigation or Solution Control read message
received
No. of
Satellites The number of satellites used in navigation is
greater than the minimum required Satellites are not used
Single
Frequency The receiver is in Single frequency navigation
(Stays Green if Dual is achieved)
Not navigating
Dual
Frequency The receiver is operating in Dual frequency
navigation True single or no
navigation achieved
PDOP
The DOP value is less than the maximum
acceptable PDOP set in Solution Control
The DOP value is more
than the maximum
acceptable PDOP set in
Solution Control
SBAS The receiver is in WAAS/EGNOS navigation
No SBAS service is
available
StarFire™ The receiver is in StarFire navigation
StarFire signal is
unavailable
RTK
(fixed)
The receiver is in RTK FIXED navigation
The receiver is operating
in RTK FLOAT mode, or
non RTK navigation