MovinCool Office Pro W20 Service Manual - Manual (Page 67)

Repair Section
67
(1) Removal of water cooled condenser
1) Disconnect four brazing points (A ~ D) as shown.
When brazing, cover the area E with a wet cloth
to prevent damage.
2) Remove two (2) nuts from the bracket. Then
remove the water cooled condenser.
3) Loosen six (6) nuts to move the bracket for
adjusting the new condenser position.
ILL00189-00
B
E
A
D
C
ILL00190-00
Nuts (2)
ILL00191-00
Nuts (3)
Nuts (3)