MovinCool Office Pro W20 Service Manual - Manual (Page 61)

Repair Section
61
(2) Relay board
1) Remove five (5) screws from service panel. (See page 56.)
2) Disconnect seven (7) connectors, and remove five (5) screws from relay board.
(3) Control board
1) Remove two (2) screws from control panel stay.
2) Remove two (2) screws from the control panel
stay.
I002212
Temperature Scale Display Switch Dip Switch
Fan Mode Control Switch
To Compressor (Black)
To Fan Motor (LO)
To Fan Motor (HI)
To Control Board(10 pin)
To Condensate Pump(2 pin)
Power (#T1) OnTerminal Block
Power (#R1) OnTerminal Block
Relay Board Fuse
ILL00152-00
Screws (2)
I002246
Screws (2)