Draw overlap line – MicroLinks VT300 - user manual User Manual
Page 62
Microscope Application Program http://www.ViTiny.com
Copyright ©2008-2012 MicroLinks Technology Corp.
Fig 5-71 3 Points Fillet
(9) 4 Points Angle: Use
to measure an angle but only see 2 unparallel lines
shown on the object. See Fig 5-72, to draw a 1
st
line from the object (see line
A), and to draw the other unparallel line (see line B), the angle can be
automatically calculated. See Fig 5-72. There is a small dot show 45.3
o
.
Fig 5-72 4 Points Fillet
5.4.8Draw overlap line“
”
While selecting this function, it can be drawn many times in the fame. After clicking
“draw overlap line” undo or redo can be used show in Fig 5-73, if not selected it only can
repeat drawings.