Input devices setting, Video format – MicroLinks VT300 - user manual User Manual

Page 11

Microscope Application Program http://www.ViTiny.com

2.2.1 Input Devices Setting

Optional Input Devices, see Fig 2-7, when there are 2 or more Input Devices

connecting to PC at the same time, you can choose which device you wish to use.

Figure2-7 Optional Input Devices

2.2.2 Video Format

Video Format is mainly to set up the frame rate, color space and output size etc. Fig. 2-8 Video

Format of microscope application program. Frame rate is frame numbers per second (fps) for playing.

Adjust the output size will slower or faster the fps, for example, if the fps is higher, the preview video

will be less clearly but with smooth performance and. On the contrary, if the fps is lower, the image

will be clearer but with a little lagging performance. This is due to the more frames requires the

more CPU loading then cause the lagging performance. The output size defines the quality of the

video, the default setting is 640*480. There are several options available for different purpose, such as,

320*240, 640*480.

Fig. 2-8 Video Format of microscope application program