MicroLinks VT300 - user manual - Manual (Page 40)

Microscope Application Program http://www.ViTiny.com
Copyright ©2008-2012 MicroLinks Technology Corp.
Fig.5-20 Draw Circular
5.2.5Choose aim point color “
”
Click this button, will pop up choose color dialog box and from there to choose color.
5.2.6Clear aim point “
”
To clear all aiming lines on fame
5.3 Video control and flip mode
This toolbar has the functions to flip image. The image will presented up-side-down when
holding by left hand. By the mode, it can preview the correct direction. The brightness, contrast
and exposure tool can be adjusted and also can cause the video image to be clearer in different
scene. Fig.5-21 is the selection video control mode. Fig. 5-22 is the video control mode toolbar.
Fig.5-21 video control mode
Fig. 5-22 video control mode toolbar
5.3.1Right hand to look at observation “
”
Right hand holds the microscope to look at observation or observes other people. The
video image does not have any flip. This function is in normal way. See Fig. 5-23 right hand