MicroLinks VT300 - user manual User Manual

Page 51

Text mode
Original mode

Microscope Application Program http://www.ViTiny.com

Fig.5-47 Setting scale dialog

 Scale default file

Scale default files have two types “Default Height Magnification” and “Default

Height Magnification” shown in Fig.5-48

Fig.5-48Scale default File

When the microscope is observing object with contacted distance, it has two focus

points. Thus, it will have two kinds of scale value which are for low and high mag.

When in low mag, the horizontal and vertical scale is 2.24 mm and 1.68mm. And

when in high mag, the horizontal and vertical scale is 0.56mm and 0.42mm. If the

default value is not right for the user, the scale value can reset or create a file for new
value by calibrate the horizontal and vertical scale according to the user‟s preferences.

If want to return the default value, chick “Scale default” box than it will delete the

new add file and return to the two default setting.