MicroLinks VT300 - user manual User Manual

Page 48

Microscope Application Program http://www.ViTiny.com

Figure5-37 horizontal scale range

5.60mm

Figure5-38 vertical scale range

4.20mm

EX3: Measurement for contacted object in high mag.

Use the “metal ruler” as a measurement base, flatly put the machine on the

observing object, adjust the focus to find the clearest image. See Fig.5-39 and

Fig.5-40 the result from measurement. Horizontal and vertical scale is 1.40mm

and 1.05mm.

Figure5-39 horizontal scale range

1.40mm

Figure5-40 vertical scale range

1.05mm

EX4: Calibrate the scale for contacted in low mag.

Use the “calibrator” as a measurement base, flatly put the machine on the

observing object, adjust the focus to find the clearest image. See Fig.5-41 and

Fig.5-42 the result from measurement. Horizontal and vertical scale is 5.6mm

and 4.20mm. Using a calibrator is more easily and accurately to get scale range.