MicroLinks VT300 - user manual User Manual

Page 55

Microscope Application Program http://www.ViTiny.com

Figure5-57 Setting of picture

magnification ratio display

Figure5-58 Saved ratio

 To delete and rename scale file

Choose delete or rename the file from the drop down menu, see Fig.5-59. Then

click “delete” or “rename”.

Fig.5-59 drop down menu choose file

 Semi-Auto Calibration

Set up a customized semi-auto Calibration. See Fig 5-60. “Input Measurement
Length” means the real length. For example, enter 400 means 4.00mm, enter 50

means 0.5mm. The Display Scale check-box is to decide to show the Display

Scale or not. If click the Horizontal Fixed, only a horizontal axis can draw on

the image; on the contrary, if click the Vertical fixed, only a vertical axis can

draw on the image. If choose “None”, axis can draw from any direction. A

horizontal or vertical axis can be draw by pressing „shift‟ button on your keyboard

together with clicking mouse left. After it is completed , please click “Finished”

for saving the new scale.

Fig 5-60 Input the actual measurement length