Print picture, Exit, Setting – MicroLinks VT300 - user manual User Manual

Page 10

Microscope Application Program http://www.ViTiny.com

2.1.4 Print Picture

Ctrl+P are a fast key

Fig.2-5 print

2.1.5 Exit

Once to choose to exit, the program would close. Ctrl+E are a fast key.

1.6 Setting

The Setting function is mainly to set up Video Format and JPG compression quality as Fig.

2-6 shows. If VT300 device is offline, video format and video signal source unable to set up

(setting in white bar). On the contrary, it can set up while device is online.

Fig. 2-6 Select Setting