Copy to clipboard, Scale setting – MicroLinks VT300 - user manual User Manual

Page 44

Microscope Application Program http://www.ViTiny.com

After measuring, it can save image by clicking “save image

” button. The save file

name will be marked as vertical and horizontal scale. If want to load the image to do

measurement, then just click “scale setting

” button to set vertical and horizontal scale,

the scale of value can be found form the file name. ie. If the file name is v420h560 means

horizontal 5.60mm and vertical is 4.20mm.

5.4.4Copy to clipboard “

”

Select “Copy to Clipboard

” button then the current frame will be copied to

clipboard,also, it will be pasted to right sub-window [Fig.1]. After copying, it can be pasted on

word or excel. Etc.

5.4.5Scale setting “

”

(1) Select suitable ruler

Before setting scale, firstly find a more accurate ruler to measure. Commonly

recommend to use metal ruler shown as Fig. 5-30.

Fig 5-30 Metal Ruler