Microcom LDSII User Manual
Page 98
Diagnostics and Troubleshooting
Chapter 6
82
LDSII Programming Guide - 880015-0123
Byte Mode
Responses
(ASCII Hex)
Text and Verbose Mode Responses
Definition
0x8A
>FLASH DEFRAGMENTING<
Flash file system is optimizing
memory.
0x8F
>STOCK NOT LOADED<
The printer was powered up with
out media installed.
0x90
>RETRACTION DELAY<
The retraction has been
delayed.
0x91
>PRINT DELAY<
The printing has been delayed.
0xB0
>FLASH MEMORY LOW<
The Flash memory file space is
95% full.
0xC0
>BUTTON 1 TAPPED<
The print button has been
pressed.
0xC1
>BUTTON 1 HELD<
The print button has been held.
0xD0
>TEMPERATURE OUT OF RANGE<
The print head temperature is
out of operating range.
0xD1
>NONEXISTENT COMMAND<
The received command does not
exist.
0xD2
>INCOMPLETE COMMAND<
The received command is not
complete.
0xD3
>ZIP FILE ERROR<
The received Zipped file has an
error.
0xD4
>FILE CONVERSION ERROR<
The file was not converted
properly.
0xD5
>UNSUPPORTED FILE TYPE<
The received file is not
recognized.
0xD6
>FILE NOT FOUND<
The requested file does not exist
or cannot be found.
0xD7
>INADEQUATE ACCESS MODE<
Incorrect password to a higher
access level.
0xD9
>FILE IS READ ONLY<
File is read only and cannot be
deleted.
0xDA
>INADEQUATE FLASH SPACE<
Cannot save an item to the flash
memory due to lack of space.
0xDB
>I/O FAILURE<
The Input/Output circuitry has
failed.
0xDC
>FONT/GRAPHIC NOT FOUND<
The requested file does not exist
or cannot be found.