Microcom LDSII User Manual
Page 97
Chapter 6
Diagnostics and Troubleshooting
LDSII Programming Guide - 880015-0123
81
Byte Mode
Responses
(ASCII Hex)
Text and Verbose Mode Responses
Definition
0x13
>CUTTER WATCHDOG
WON’T RESET<
The software cannot reset the
cutter after a stopped condition.
0x1C
>MISSING LABEL<
Generated if more than one die-
cut label has been detected.
0x1D
>INCOMPLETE FORM<
A complete script did not print on
a >STOCK OUT< condition.
0x20
>CATCH TRAY FULL<
The PMH has reached its
capacity.
0x21
>INPUT 1<
The Input 1 sensor has been
actuated.
0x22
>INPUT 2<
The Input 2 sensor has been
actuated.
0x30
>SCRIPT ERROR<
An error with the script has been
detected.
0x31
>INVALID PARAMETER<
The printer has detected an
invalid parameter.
0x32
>PARSER ERROR<
An error with the printer’s parser
has occurred.
0x40
>COMM ERROR<
A Communication error has
been detected.
0x51
>FLASH ERROR<
The flash memory has
encountered an error.
0x80
>RESTARTED<
The printer has been powered
on or the power has been reset.
0x81
>READY<
The printer is in ready to receive
data.
0x82
>BUSY<
The printer is currently busy.
0x83
>PAUSED<
The printer has been paused.
0x84
>PRINTING<
The printer is currently printing.
0x85
>FEEDING<
The printer is currently feeding
media.
0x86
>LABEL/TAG PRESENT<
Media has been presented in a
dispense mode.
0x87
>STOCK ADVANCED<
The media has been advanced.