Microcom 48-466 User Manual
Page 82
Quick Reference Command Summary
Appendix A
48-466 Operators Manual
76
XX
103
User memory configuration:
0
Send the size (in bytes) of PDF Memory to serial port 1.
1
Send the size (in bytes) of total User Memory to serial port 1. Note: This is the
total size of user memory, not the size of unused User Memory, which can still be
obtained by the ^D101 command.
106
Load font or graphic:
161
RAM checksum control: If enabled, this command will cause the printer to verify
the integrity of internal user RAM. The RAM checksum is updated each time that
a file is stored in user RAM. This command should only be enabled if the printer
is equipped with the battery backed RAM option.
0
Disable RAM checksumming
1
Enable RAM checksumming