Microcom 48-466 - Manual (Page 23)

Chapter 3 Communications
48-466 Operators Manual 17
4.0 OR 800 DOTS LSX
3.0 OR 600 DOTS LSY
FEED DIRECTION
X BEGINNING
0625
Y BEGINNING
THIS IS 0,0
THIS IS THE WEB VALUE
OR 12 DOTS
THIS IS THE GAP VALUE
OR 25 DOTS .125
MICROCOM
4.4 LABEL HEADER
The header consist of eleven parameters. These parameters contain information about the label.
It is not necessary to enter information for all of the parameters: If a parameter is left blank, then the
default value will be used. A carriage return must follow the label header parameters.
The value of measurement for many of the header elements is the dot. There are 203 dots per inch
on a 48-466 print head (8 dots/mm). There is a maximum 832 dots in the X direction (width). The
Y direction (length) is virtually unlimited.
Most header parameters can be supplied using the auto-size command. (See section 5.3.3.)
Below is a list of the header element mnemonics and their default values:
HFM,LSX,LSY,WEB,GAP,DPS,LCB,AGD,SPG,OFX,OFY
0,832,614, 13, 24, 35, 0, 1,490, 0, 0
Label Header Parameters of a 4" X 3" Label
Figure 9