Microcom 48-466 - Manual (Page 80)

Quick Reference Command Summary Appendix A
48-466 Operators Manual 74
XX 73 Load copies count: Tells the printer to print a group of labels. Will not increment
serial numbers (use ^D75).
1 74 Infinity Print: Prints a batch of labels like ^D75 but will continue to print until the
machine is turned off.
XX 75 Load Label Count: Tells the printer to print a batch of labels using the serial
number function if enabled.
XX 76 Load Delay Time Between Labels: Preceded by ^A which contains the wait in
1/10ths of a second. Maximum value is 650.
71 Load PDF-417 Bar Code Data:
80 Clears Commands 86, 88, 89.
81 Disable Serial Number Function: Will disable either single or multiple serial
number commands.
XX 84 Load Text String Number to increment/decrement: Tells the printer which
text string number to increment or decrement. For single serial numbers. Section
5.3.8.
XX 85 Load increment/decrement step value: This is the value that the single serial
number is incremented or decremented.
86 Single Serial Number Status:
0 Disable increment and decrement.
1 Enable increment. The serial number will be decreased by the value from ^D85.
2 Enable Decrement. The serial number will be decreased by the value from ^D85.
XX 87 Load Field Number to Clear Increment/Decrement
status: Clear the status of one or more serial numbers with this command.
XX 88 Load Field Number to Increment by 1: For multiple serial numbers.
XX 89 Load Field Number to Decrement by 1: For multiple serial numbers.
90 Piezo Beep Control:
0 Enable continuous beep on error.
1 Disable continuous beep on error
XX 91 Load Value for Printer to See Valid Gap. Section 5.3.
XX 92 Load Value for Slices to Process: This command adjusts the number of slices
generated before the drive motor starts moving. The default is 256 and the valid
range is 1 to 366.
93 Load Control Code Recognition Status:
0 Enable control code recognition.
1 Disable control code recognition.