Microcom 48-466 - Manual (Page 44)

Printer Commands Chapter 5
48-466 Operators Manual 38
^A ^D COMMAND
25 Change SW5: Change software dip switch #5.
12345678
^ABxxxxxxxx
*******.Q
Always 0
******.)Q
Always 0
*****.))Q
Always 0
****.)))Q
Always 0
***.))))Q
Always 0
**.)))))Q
Always 0
*.)))))))
Always 0
.))))))))
Always 0
Position:
1-8 Always 0.
26 Change SW6: Change software dip switch #6.
12345678
^ABxxxxxxxx
*******.
Not Used
******.)
Not Used
*****.))
Not Used
****.)))
Not Used
***.))))
Not Used
**.)))))
Not Used
*.))))))
Not Used
.)))))))
Always 0
Position:
1 Always 0
2 Not Used
3 Not Used
4 Not Used
5 Not Used
6 Not Used
7 Not Used
8 Not Used
XX 36 Adjust Contrast Base: Used to adjust the contrast base point for such things as
high-speed paper and print head wear. This command is stored in the non-volatile
memory and skews the entire contrast window (^D35). This command has a ^A
range of 10 to 200%.