Microcom 48-466 User Manual
Page 52
Printer Commands
Chapter 5
48-466 Operators Manual
46
To list a file that has previously been sent to the printer, use the ^AX^D54 command, where
^AX denotes the file to be read. The printer will send the file to the serial port.
Sample files: File #1 initiates the save format file memory and downloads saved format file
#1. File #1 includes all the fixed data on the label. File #2 is the file that initiates processing
of file #1 and includes all variable data for the format. File #2 also prints the label. File #3
shows how a second saved format would look if the entire format was in one file.
NOTE:
File #1
^D1005
;Remember, send this string first time.
^A1^D595
^D575
4,288,193,5,19,30,0,1,1485
1,100,20,10,1,10,0,2,1,1,,15
1,210,20,7,1,10,0,2,2,2,,115
1,152,154,12,12,,0,2,2,100,,185
1,130,54,12,32,,0,2,2,2,,185
^D565
^D25
File #2
^A1^D585
24 PRINTS $ 3.79 204963403795
^D35