2 the status lights and sounds, 3 loading paper, 4 cleaning instructions – Microcom 48-466 User Manual
Page 15
Chapter 2
Basic Operation
48-466 Operators Manual
9
2.2
THE STATUS LIGHTS AND SOUNDS
The status lights have different functions depending upon the mode of the printer. The following
table explains the meanings.
Status Light
Color
Sound
Mode
Meaning
Solid Green
None
All
Power is on.
Solid Green
Long Error
All
Memory operation unsuccessful.
Solid Green
3 Short
Beeps
All
Memory operation successful.
Solid Red
Continuous
Pulsed
Beep
All
Printer error:
Caused by a paper-out, or hardware failure.
If an unexplained condition persists, contact
your service representative.
Flashing Red
Continuous
Pulsed
Beep
All
Spike or low voltage on the AC line. The unit
will remain in this mode until the condition is
removed and the printer is powered off.
Solid Yellow
N/A
All
Printer is On-Line.
Table 1
2.3
LOADING PAPER
(TBD)
Printer Feed Mechanism
Figure 5
2.4
CLEANING INSTRUCTIONS
(TBD)