Microcom 48-466 User Manual
Page 36
Communications
Chapter 3
48-466 Operators Manual
30
4.5.3 A SAMPLE SESSION (FIELDS)
Looking at the sample label...
^D575
5,812,1218,,20,355
1,190,1068,8,1,8,,,2,25
2,139,900,11,1,8,,,2,25
3,117,760,26,1,85
4,265,560,11,1,85
4,123,50,11,16,3,,,3,4065
^D565
^D25
Microcom5
Corporation5
Thermal Printing Solutions5
012345678905
^D35
A label format is coming
Header information
Field #1 information
Field #2 information
Field #3 information
Field #4 information
Field #5
Select RAM Format
Text Data is Coming
Text String #1
Text String #2
Text String #3
Print Label 1
... and referring to Field #1.
1,190,1068,11,1,8,,,2,25
5
1 -
Field refers to text string #1 - Microcom. This field could
have referred to Corporation, if it had a TSN of 2. The fields
do not have to be in any kind of order with respect to the
data fields.
190 -
X beginning (XB) 190 dots from left edge of the print head.
1068 -
Y beginning (YB) 40 dots from bottom of label.
8 -
Character Count (CC) of 8 characters, the amount of characters
in Microcom.
1 -
A TCI of 1 indicates that the data will appear on the label as
text, an ASCII string, as opposed to, for example, a bar code.
8 -
This CGN selection of 8 selects an 18pt font.
,,, -
This will default the next two positions.
2 -
This sets the X multiplication to 2.
2 -
This sets the Y multiplication to 2.
5
5 -
A carriage return signals the end of this field.
The field parameters that were not defined will default. A FO and FJ of 0 will place EASY to the right
of the X coordinate with a rotation of 0 degrees. CMX and CMY will default to 1, so the character will
be the size as defined by the font. The TSN is 1, therefore the entire word EASY will print (a TSN
of 2 would have printed ASY). CLX and CLY will default to 5 and 7, respectively, so a full character
will be printed.